Union EF Premium Brite Cotton White
Processing...

Union EF Premium Brite Cotton White

Code: UPADE1027

$26.21

Qty
User's Guide

Product Description

•••••

For direct printing as an under base, stand-alone or highlight white on 100% cotton garments.

Instructions:

  • Stencils: Use any direct emulsion or capillary film compatible with plastisol inks. When using liquid emulsions, a good coating technique (2+2) starting on the print side and proper exposure typically provides the best opacity, edge definition, and stencil longevity.
  • Additives: These inks are supplied ready to print. Since plastisol inks "body up" as they sit in the container, you should always stir the ink well to determine the actual printing viscosity before adding any reducer. If necessary reduce with small amounts 5-10% of Reducer / Detackifier (PLRE-9000). Reducing the ink usually reduces the opacity. Do not add mineral spirits.
  • Printing Instructions: These whites may be printed on both manual and automatic presses using normal printing techniques. For increased ink deposits multiple strokes may be necessary on manual presses. A soft pad on the printing pallet and minimal squeegee pressure will minimize penetration into the garment and enhance the final print. The use of a "Smoothing Screen" technique immediately after a flash white will increase smoothness of a finished graphic dramatically.
  • Flash-Curing: Inks will gel when surface of ink film reaches approximately 240°F / 115°C. Flash times will vary depending on type of flash-cure unit, dwell time and distance from flash panel to substrate.
  • Curing: Entire thickness of the ink film must reach 310°F / 154°C to achieve full cure and subsequent washfastness. Thicker ink deposits typically require higher temperatures and longer dwell times in oven. High moisture content in cotton garments can potentially cause under cure. Be sure garment is in dryer long enough to evaporate all moisture allowing for full cure and providing optimum performance of printed inks.
  • Washability: Excellent when properly cured. Never dry clean. or iron plastisol printed areas.