Chemica HotMark Print Width: 30"
Processing...

Chemica HotMark Print Width: 30"

Code: VHMP30

$16.00

As Low As: $14.00

Length: Per Yard

Size: 30 Inches

Roland Compatible:

MAX, MAX 2, TrueVIS

Quantity Price
1-4 $16.00
5-21 $15.00
22+ $14.00

Qty
User's Guide

Product Description

•••••
HotMarkPrint is our thinnest, stretchiest, and softest opaque printable heat transfer film!

  • Prepare your design right-reading (DO NOT MIRROR) following the instruction of the printer manufacturer. NOTE: It is recommended to use OEM printer inks. Printable medias are very sensitive: always handle with care, preferably with gloves.
  • Set your printing temperature to 45°C and drying temperature to 50°C.
  • Use the adequate printing profile (for instance, with Roland COLORIP or VersaWorks, select the profile GENERIC VINYL 1, and we recommend to select the option MAX IMPACT).
  • Remove the product from the printer and wait for the complete drying of inks at room temperature, at least 4 hours.
  • Weed the excess material.
  • Use an application tape(mask) to transfer your design.
  • Position and heat press your design on the garment protected by a silicone paper at 320°F–20 seconds – medium pressure.
  • If you used tape, peel it off when warm.