Chemica HotMark Print Width: 20"
Processing...

Chemica HotMark Print Width: 20"

Code: VHMP1792-20

$14.00

As Low As: $12.75

Width: 15 Inches

Length: Per Yard

Roland Compatible:

MAX, MAX 2, TrueVIS

Quantity Price
1-10 $14.00
11-21 $13.50
22+ $12.75

Qty
User's Guide

Product Description

•••••
HotMarkPrint is our thinnest, stretchiest, and softest opaque printable heat transfer film!

  • Prepare your design right-reading (DO NOT MIRROR) following the instruction of the printer manufacturer. NOTE: It is recommended to use OEM printer inks. Printable medias are very sensitive: always handle with care, preferably with gloves.
  • Set your printing temperature to 45°C and drying temperature to 50°C.
  • Use the adequate printing profile (for instance, with Roland COLORIP or VersaWorks, select the profile GENERIC VINYL 1, and we recommend to select the option MAX IMPACT).
  • Remove the product from the printer and wait for the complete drying of inks at room temperature, at least 4 hours.
  • Weed the excess material.
  • Use an application tape(mask) to transfer your design.
  • Position and heat press your design on the garment protected by a silicone paper at 320°F–20 seconds – medium pressure.
  • If you used tape, peel it off when warm.